Geekvape Digi Q Vista Pod Vape Kit

Geekvape Digi Q Vista Pod Kit

The Geekvape Digi Q Vista pod kit runs three vaping modes through a 1600mAh battery at up to 35W. Smart Mode reads your coil and sets the wattage, Dynamic Mode hands you manual control, and Eco Mode drops output to stretch the battery. Geekvape has put a 3D curved colour display on this one showing wattage, battery, resistance, and puff count. USB-C charging gets it from flat to full in under an hour.

Two Q Pods ship in the box at 0.6 ohm and 0.8 ohm, and the Digi Q Vista takes the full Geekvape Q Pod range including the 1.2 ohm for tighter MTL draws. Each pod holds 2ml, fills from the top, and has built-in mesh coils. Adjustable airflow on the pod covers MTL and RDL depending on your pod and setting. Dual activation lets you switch between button-fire and auto-draw. Works with nic salts or 50/50 e-liquids.

Key Features

• 35W max output across Smart, Dynamic, and Eco modes
• 1600mAh built-in battery, USB-C charging under 60 minutes
• 3D curved colour display showing wattage, battery, resistance, puff count
• Smart Mode auto-detects pod and sets wattage
• Dynamic Mode for manual wattage and airflow control
• Eco Mode reduces output to save battery
• Q Pods: 0.6 ohm and 0.8 ohm included, 1.2 ohm available
• 2ml TPD pods with built-in mesh coils, top-fill
• Dual activation: button-fire or auto-draw
• Adjustable airflow for MTL and RDL
• A-Lock fire button lock
• Nic salt and 50/50 e-liquid compatible

Digi Q Vista Battery and Modes

1600mAh gets you through a full day on moderate MTL wattages, roughly 900-1300 puffs depending on how hard you're pulling and which mode you're in. Heavier RDL use at 30W+ brings that down to 7-9 hours. Eco Mode is there when you need the battery to last longer.

Three modes, each doing something different:

Triple-click the fire button to swap between them. The 3D curved display shows which mode you're running.

3D Curved Screen

The colour display curved into the body of the kit so it sits flush rather than sticking out. Shows battery percentage, wattage, coil resistance, puff count, and current mode on one screen. Brightness dims after a few seconds idle and comes back when you fire. Fire button lock shows a lock icon on screen when active.

Geekvape Digi Q Vista Q Pods

All Geekvape Q Pods fit the Digi Q Vista. Built-in mesh coils, top-fill silicone plug, swap the whole pod when the coil's done.

The 0.6 ohm pod at 18-25W gives you proper RDL vapour with 50/50 e-liquids. Drop to the 0.8 ohm for something between MTL and RDL. The 1.2 ohm on nic salts at 8-12W is the tightest draw, closest to a cigarette pull. Each pod lasts roughly 10-15ml of e-liquid. Grab replacements from the Geekvape Q Pod range.

Airflow and Dual Activation

Airflow control on the pod. Close it with the 1.2 ohm for tight MTL, open it on the 0.6 ohm for RDL. The ring holds position and doesn't drift.

Button-fire or auto-draw, swap between them depending on how you want to use it. Auto-draw responds when you inhale, no delay. A-Lock disables the fire button when you're carrying the Digi Q Vista around so it won't fire in a pocket.

Digi Q Vista Specifications

Why Choose the Geekvape Digi Q Vista

Three actual modes rather than just a wattage dial. Smart takes care of everything, Dynamic lets you fine-tune, and Eco stretches the battery when you need it. Most pod kits at this size give you one or two modes at best. The Digi Q Vista gives you three and shows everything on a curved colour screen.

1600mAh handles a full day's MTL use and Q Pods covering 0.6-1.2 ohm mean you can run it from loose RDL at 25W down to tight MTL at 8W with nic salts. Dual activation, adjustable airflow, and A-Lock are standard. If you want more wattage and a touchscreen, the Digi Max runs 80W with a bigger battery.

What's in the Box?

• 1 x Geekvape Digi Q Vista Pod Kit (1600mAh)
• 1 x 0.6 ohm Geekvape Q Pod (pre-installed)
• 1 x 0.8 ohm Geekvape Q Pod (spare)
• 1 x USB-C Charging Cable
• 1 x Warranty and Info Card
• 1 x User Manual