








Geekvape Digi Max 80W Pod Vape Kit
Geekvape Digi Max Pod Kit
The Geekvape Digi Max pod vape kit puts 80W of adjustable output behind a 1.47 inch colour touchscreen. Swipe to change wattage, switch modes, or check your battery rather than clicking through button combos. Geekvape has put a 3000mAh battery in this one, good for up to 3 days between charges, and USB-C gets it from flat to full in about 20 minutes.
Two J Pod cartridges ship in the box at 0.4 ohm and 0.6 ohm. The Digi Max also takes JR Pods with replaceable J coils covering 0.3 ohm up to 1.2 ohm if you want to swap between resistances. Both pod types fill from the top, and coils press-fit in with no threading. Four modes are built in: Smart reads your coil and picks the wattage, Boost pushes harder, Eco stretches the battery, and Custom hands you full control. Works with nic salts, 50/50 e-liquids, or higher VG mixes depending on your coil.
Key Features
- 80W adjustable output, 5-80W range
- 3000mAh built-in battery, up to 3 days between charges
- 1.47" colour touchscreen at 2K resolution
- Four modes: Smart, Boost, Eco, Custom
- J Pod cartridges (0.4 ohm and 0.6 ohm included)
- JR Pod compatible with replaceable J coils (0.3-1.2 ohm)
- Top airflow, adjustable draw tightness
- Inhale or button fire, dual activation
- A-Lock to prevent pocket firing
- USB-C fast charging, 20 minutes flat to full
- RGB light strip with colour options
- Eight colours including Misty Blue, Ruby Red, Sakura Pink

Digi Max 3000mAh Battery and Charging
3000mAh is a big cell for a pod kit. At moderate wattages on the 0.6 ohm pod, you'll get 2-3 days out of a single charge without much thought. Even running the 0.4 ohm pod closer to 80W, a full day is comfortable. USB-C at 5V/2A pulls it back from flat in around 20 minutes. Overcharge and over-discharge protection are built into the battery management as well.

80W Output and Geekvape Digi Max Modes
5W up to 80W, adjustable through the touchscreen. Four modes cover different styles:
|
Mode |
What It Does |
|
Smart |
Reads your coil, sets wattage automatically |
|
Boost |
Pushes harder for thicker vapour and stronger flavour |
|
Eco |
Drops output to save battery and e-liquid |
|
Custom |
Full manual wattage control |
Smart is the simple option for day-to-day use. Boost is there when you want more from the same coil. Eco is handy if you're out all day and need the 3000mAh to last. Swipe between them on the screen.
1.47 Inch Touchscreen
2K resolution on a 1.47 inch colour display. Wattage, resistance, battery percentage, puff count, and mode selection all sit on one screen. Tap and swipe to change settings instead of holding buttons. It's responsive enough that you won't find yourself jabbing at it repeatedly.

J Pod and JR Pod Cartridges
Two cartridge types fit the Digi Max pod kit. J Pods have built-in coils and the two in the box cover the basics.
|
Cartridge |
Coil |
Wattage |
Style |
|
J Pod (included) |
0.4 ohm (built-in) |
MTL/RDL range |
Tighter draw |
|
J Pod (included) |
0.6 ohm (built-in) |
RDL range |
Looser draw |
JR Pods take replaceable J coils, so you can swap between 0.3, 0.4, 0.6, and 1.2 ohm without buying a whole new cartridge. Both types hold 2ml (TPD) and refill from the top. The full Geekvape J coil and pod range covers all the options.
Nic salts and 50/50 e-liquids work well on the higher resistance coils. Lower resistance options can handle 70/30 shortfills at higher wattages.
Airflow, A-Lock, and Activation
Top airflow on the cartridge keeps e-liquid away from the air path. You can tighten it up for a restricted MTL draw or open it out for RDL. The Digi Max fires on inhale or button press, so you're not locked into one method.
A-Lock is a safety function that disables both the fire button and draw sensor. Flick it on when the kit goes in a pocket or bag and it won't activate by accident.
Digi Max Specifications
|
Spec |
Detail |
|
Model |
Geekvape Digi Max |
|
Output |
5-80W adjustable |
|
Battery |
3000mAh built-in |
|
Charging |
USB-C, 5V/2A, ~20 min full charge |
|
Display |
1.47" 2K colour touchscreen |
|
Pod Capacity |
2ml (TPD) |
|
Cartridge Compatibility |
Geekvape J Pods, JR Pods |
|
Included Cartridges |
0.4 ohm J Pod, 0.6 ohm J Pod |
|
Coil Range (JR Pod) |
0.3, 0.4, 0.6, 1.2 ohm (J coils) |
|
Modes |
Smart, Boost, Eco, Custom |
|
Airflow |
Top, adjustable |
|
Activation |
Inhale or button fire |
|
Safety |
A-Lock, overcharge, over-discharge |
|
Material |
Aluminium alloy and PC |
|
Weight |
95g |
|
Colours |
8 |
Geekvape Digi Max Colours
Eight options, all aluminium alloy with RGB light strip:
|
Colour |
Finish |
|
Pearl White |
Clean white |
|
Moon Silver |
Silver metallic |
|
Gunmetal Grey |
Dark metallic grey |
|
Space Black |
Matte black |
|
Misty Blue |
Blue metallic |
|
Ruby Red |
Red metallic |
|
Sakura Pink |
Pink metallic |
|
Lavender Haze |
Purple/lavender |
Why Choose the Geekvape Digi Max Pod Kit
80W and a touchscreen in a 95g Digi pod kit is a lot of kit for the size. Most touchscreen vapes at this wattage are bulkier or heavier. The Digi Max keeps it pocketable and the 3000mAh battery means you won't be charging it every night.
J Pod and JR Pod compatibility gives you two approaches. Built-in coil pods for simplicity, replaceable coil pods for flexibility and lower running costs. The 0.3-1.2 ohm coil range covers everything from a tight MTL draw on nic salts to a looser RDL at higher wattages. A-Lock, four modes, and dual activation round it out.
What's in the Box?
- 1 x Geekvape Digi Max Pod Vape Kit
- 1 x J Pod Cartridge (0.4 ohm)
- 1 x J Pod Cartridge (0.6 ohm)
- 1 x USB-C Cable
- 1 x User Manual
Original: $26.59
-70%$26.59
$7.98Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Geekvape Digi Max Pod Kit
The Geekvape Digi Max pod vape kit puts 80W of adjustable output behind a 1.47 inch colour touchscreen. Swipe to change wattage, switch modes, or check your battery rather than clicking through button combos. Geekvape has put a 3000mAh battery in this one, good for up to 3 days between charges, and USB-C gets it from flat to full in about 20 minutes.
Two J Pod cartridges ship in the box at 0.4 ohm and 0.6 ohm. The Digi Max also takes JR Pods with replaceable J coils covering 0.3 ohm up to 1.2 ohm if you want to swap between resistances. Both pod types fill from the top, and coils press-fit in with no threading. Four modes are built in: Smart reads your coil and picks the wattage, Boost pushes harder, Eco stretches the battery, and Custom hands you full control. Works with nic salts, 50/50 e-liquids, or higher VG mixes depending on your coil.
Key Features
- 80W adjustable output, 5-80W range
- 3000mAh built-in battery, up to 3 days between charges
- 1.47" colour touchscreen at 2K resolution
- Four modes: Smart, Boost, Eco, Custom
- J Pod cartridges (0.4 ohm and 0.6 ohm included)
- JR Pod compatible with replaceable J coils (0.3-1.2 ohm)
- Top airflow, adjustable draw tightness
- Inhale or button fire, dual activation
- A-Lock to prevent pocket firing
- USB-C fast charging, 20 minutes flat to full
- RGB light strip with colour options
- Eight colours including Misty Blue, Ruby Red, Sakura Pink

Digi Max 3000mAh Battery and Charging
3000mAh is a big cell for a pod kit. At moderate wattages on the 0.6 ohm pod, you'll get 2-3 days out of a single charge without much thought. Even running the 0.4 ohm pod closer to 80W, a full day is comfortable. USB-C at 5V/2A pulls it back from flat in around 20 minutes. Overcharge and over-discharge protection are built into the battery management as well.

80W Output and Geekvape Digi Max Modes
5W up to 80W, adjustable through the touchscreen. Four modes cover different styles:
|
Mode |
What It Does |
|
Smart |
Reads your coil, sets wattage automatically |
|
Boost |
Pushes harder for thicker vapour and stronger flavour |
|
Eco |
Drops output to save battery and e-liquid |
|
Custom |
Full manual wattage control |
Smart is the simple option for day-to-day use. Boost is there when you want more from the same coil. Eco is handy if you're out all day and need the 3000mAh to last. Swipe between them on the screen.
1.47 Inch Touchscreen
2K resolution on a 1.47 inch colour display. Wattage, resistance, battery percentage, puff count, and mode selection all sit on one screen. Tap and swipe to change settings instead of holding buttons. It's responsive enough that you won't find yourself jabbing at it repeatedly.

J Pod and JR Pod Cartridges
Two cartridge types fit the Digi Max pod kit. J Pods have built-in coils and the two in the box cover the basics.
|
Cartridge |
Coil |
Wattage |
Style |
|
J Pod (included) |
0.4 ohm (built-in) |
MTL/RDL range |
Tighter draw |
|
J Pod (included) |
0.6 ohm (built-in) |
RDL range |
Looser draw |
JR Pods take replaceable J coils, so you can swap between 0.3, 0.4, 0.6, and 1.2 ohm without buying a whole new cartridge. Both types hold 2ml (TPD) and refill from the top. The full Geekvape J coil and pod range covers all the options.
Nic salts and 50/50 e-liquids work well on the higher resistance coils. Lower resistance options can handle 70/30 shortfills at higher wattages.
Airflow, A-Lock, and Activation
Top airflow on the cartridge keeps e-liquid away from the air path. You can tighten it up for a restricted MTL draw or open it out for RDL. The Digi Max fires on inhale or button press, so you're not locked into one method.
A-Lock is a safety function that disables both the fire button and draw sensor. Flick it on when the kit goes in a pocket or bag and it won't activate by accident.
Digi Max Specifications
|
Spec |
Detail |
|
Model |
Geekvape Digi Max |
|
Output |
5-80W adjustable |
|
Battery |
3000mAh built-in |
|
Charging |
USB-C, 5V/2A, ~20 min full charge |
|
Display |
1.47" 2K colour touchscreen |
|
Pod Capacity |
2ml (TPD) |
|
Cartridge Compatibility |
Geekvape J Pods, JR Pods |
|
Included Cartridges |
0.4 ohm J Pod, 0.6 ohm J Pod |
|
Coil Range (JR Pod) |
0.3, 0.4, 0.6, 1.2 ohm (J coils) |
|
Modes |
Smart, Boost, Eco, Custom |
|
Airflow |
Top, adjustable |
|
Activation |
Inhale or button fire |
|
Safety |
A-Lock, overcharge, over-discharge |
|
Material |
Aluminium alloy and PC |
|
Weight |
95g |
|
Colours |
8 |
Geekvape Digi Max Colours
Eight options, all aluminium alloy with RGB light strip:
|
Colour |
Finish |
|
Pearl White |
Clean white |
|
Moon Silver |
Silver metallic |
|
Gunmetal Grey |
Dark metallic grey |
|
Space Black |
Matte black |
|
Misty Blue |
Blue metallic |
|
Ruby Red |
Red metallic |
|
Sakura Pink |
Pink metallic |
|
Lavender Haze |
Purple/lavender |
Why Choose the Geekvape Digi Max Pod Kit
80W and a touchscreen in a 95g Digi pod kit is a lot of kit for the size. Most touchscreen vapes at this wattage are bulkier or heavier. The Digi Max keeps it pocketable and the 3000mAh battery means you won't be charging it every night.
J Pod and JR Pod compatibility gives you two approaches. Built-in coil pods for simplicity, replaceable coil pods for flexibility and lower running costs. The 0.3-1.2 ohm coil range covers everything from a tight MTL draw on nic salts to a looser RDL at higher wattages. A-Lock, four modes, and dual activation round it out.
What's in the Box?
- 1 x Geekvape Digi Max Pod Vape Kit
- 1 x J Pod Cartridge (0.4 ohm)
- 1 x J Pod Cartridge (0.6 ohm)
- 1 x USB-C Cable
- 1 x User Manual





















